USE AND OPERATION:
These valves are used to control the actuator movements and block it in both directions. In order to have the descent of a load under control and avoid the load's weight being carried away the valve will prevent any cavitation of the actuator. Flange ports enable direct mounting of the valve onto the actuator.
MATERIALS AND FEATURES:
Body: zinc-plated steel.
Internal parts: hardened and ground steel.
Seals: BUNA N standard.
Leakage: negligible leakage.
Standard setting: 320 Bar.
Valve setting must be at least 1.3 times more than load pressure in order to enable the valve to close even when subjected to the maximum load pressure.
Connect V1 and V2 to the supply and flange C1 and C2 directly to the actuator.
Oil temperature 50° C – Oil viscosity: 30 cST
All orders placed before 4pm will be dispatched that same day.
Who do we use?
We use some of the top carrier companies in the world, although you can use your own carrier to collect the order. Below are our main carrier companies.
For all other International shipments, costs are clearly marked on the item listing.
Please make sure the ship to address you type during checkout is correct.
We are not responsible for any wrong or undeliverable addresses.
All shipments for UK Delivery over 1.7kg are despatched by Fed Ex, TNT, DPD.
All smaller shipments are despatched by Royal Mail Postal service.
We take great care packaging every item to ensure safe shipment to you.
Click here to download our technical information