Hydraulic Regenerative Valve 1/2""
Use and Operation:
This valve allows the recovery the oil from port C1 connected to the rod side and pass it to the head side of the cylinder via port P, therefore adding it to the pump flow rate. When the cylinder head side pressure achieves the setting value, oil from the rod side is sent to the tank through port V1, restoring a non-regenerative system with maximum force. The shut off pressure of the regenerative circuit depends only on the head side of the cylinder.
Materials and Features:
Body: Zinc-plated steel
Internal parts: Hardened and ground steel
Seals: BUNA N standard
Leakage: Minimal leakage
Connect C1 to the cylinder rod side, V1 to the supply, P to the cylinder head side and to the supply, M to the pressure gauge if required.
All orders placed before 4pm will be dispatched that same day.
Who do we use?
We use some of the top carrier companies in the world, although you can use your own carrier to collect the order. Below are our main carrier companies.
For all other International shipments, costs are clearly marked on the item listing.
Please make sure the ship to address you type during checkout is correct.
We are not responsible for any wrong or undeliverable addresses.
All shipments for UK Delivery over 1.7kg are despatched by Fed Ex, TNT, DPD.
All shipments for delivery within the EU will arrive on a 2-5 delivery service depending on Country location, please check for accurate delivery times within the EU with the Flowfit sales department.
All shipments outside the EU will arrive on a 3-7 day delivery service depending on Country location, please check for accurate delivery times with the Flowfit sales department.
All smaller shipments are despatched by Royal Mail Postal service.
We take great care packaging every item to ensure safe shipment to you.
Orders are generally shipped on the day of full payment or latest next day depending on when payment is received; all deliveries require a signature on delivery.
Click here to download our technical information