Hydraulic Single Overcentre Valve, VBCD 3/8 SE
- Buy 4 for £40.51 £33.76 each and save 4%
- Buy 9 for £38.83 £32.36 each and save 8%
- Buy 16 for £37.13 £30.94 each and save 12%
- Buy 31 for £35.88 £29.90 each and save 15%
Hydraulic Single Overcentre Valve, VBCD 3/8" SE, Pilot Ratio 1:3,1, Max Flow 35 L/min, Max Pressure 350 Bar
- 3/8" BSP
- Pilot Ratio 1:3,1
- Max Flow 35L/min
- Max Pressure 350Bar
USE AND OPERATION:
These valves are used to control the actuator movements and block in one direction. In order to have the descent of a load under control and avoid the load's weight being carried away the valve will prevent any cavitation of the actuator.
MATERIALS AND FEATURES:
Body: zinc-plated steel.
Internal parts: hardened and ground steel.
Seals: BUNA N standard.
Leakage: negligible leakage.
Standard setting: 320 Bar.
Valve setting must be at least 1.3 time more than load pressure in order to enable the valve to close even when subjected to the maximum load pressure.
Connect V1 and V2 to the supply, C1 to the free flow side of the actuator and C2 to the actuator side you want the flow to be blocked. In-line mounting.
- Non standard pressure settings
- sealing cap (CODE/P) and arrangement for sealing cap (CODE/PP)
Oil temperature: 50 C – Oil viscosity: 30 cSt
|Flow Rate||35 L/min|
|Pilot Ratio||Pilot Ratio 1:3,1|
|Port Size||3/8 BSP Ports|
|Valve Type||VBCD 3/8 SE|
Write Your Own Review
More from Oleodinamica Marchesini
Hydraulic 3 Way Flow Priority Valve With Reverse Check Valve RFP3, c/VUAs low as £131.04 £109.20
Hydraulic Double Acting Plough Overturning Valve With Alignment For On Land Ploughs (Patent 2013), VRAP SV FSAs low as £501.49 £417.91
Hydraulic Double Overcentre Valves Type A With Brake Unclamping, VBCD DE A SFAs low as £145.03 £120.86
Hydraulic Single Pilot Operated Check Valve Type A, VBPSE AAs low as £40.22 £33.52