Hydraulic series 71000 PTO gearbox, group 3 Male shaft, ratio 1:3 20Kw 34-71001-4
Hydraulic series 71000 PTO gearbox, group 3 male shaft, ratio 1:3 20Kw
- Ratio 1:3
- To Suit Group 3 Pump
- Male Shaft
- Series 71000
HYDRAULIC SERIES 71000 PTO GEARBOX GROUP 3 MOUNT, 20 Kw
Part Number: 34-71001-4
PTO Gearbox: 71001
The PTO Gearboxes are designed for connecting gear pumps to farm tractor power take offs (PTO). Output speed of power take offs is 540rpm which can be compared with the proper running speeds of hydraulic pumps. Different input running speeds can also be suitable,provided that the PTO gearbox output speed does not exceed 3000 rpm.
Made in shell-cast aluminum or in high mechanical resistance cast iron.
The gears have manufactured to ISO/DIN 3990-88 standards.Made in Steel UNI 18 PCR M03.Stub teeth guarantee very high resistance and run very quietly.
Made in steel UNI 16 CRN4.They are coupled with splined gears and are designed to stand the torque values stated in the catalogue.
The torque figures mentioned in the technical charts of all the PTO Gearboxes refer to continuous duty cycles. Torques under intermittent working conditions can be exceeded by 20%.
SAE 90 gear oil must be put in the pto gearbox prior to use-please note we do not supply the gear oil and will not accept responsibility for customers not putting oil in. Change the oil after the first 60-80 hours and then every 12 months or 1500 hours which ever falls first.
Please check the oil level via the special oil window every 50 hours. Working temperatures should not exceed 120 degrees celcius under continuos duty cycle.
Specifiy the correct PTO Gearbox
Please check with theTechnical Sales Office if you are not sure which PTO Gearbox to use.
|Gearbox Ratio||Ratio 1:3|
Write Your Own Review
More from Flowfit
Flowfit hydraulic cetop 3 modular flow control valve with check meterAs low as £60.08 £50.07