Hydraulic Hose Burst Cartridge Valve (Cartridge Only) VUBA 1/4

£4.16 £3.47
  • Buy 16 for £4.01 £3.34 each and save 4%
  • Buy 31 for £3.84 £3.20 each and save 8%
  • Buy 61 for £3.66 £3.05 each and save 12%
  • Buy 101 for £3.52 £2.93 each and save 16%

Hydraulic Hose Burst Cartridge Valve (Cartridge Only) VUBA 1/4", Max Flow 20 L/min, Max Pressure 350 Bar

  • 1/4" BSP
  • Max Flow 20 L/min
  • Max Pressure 350 Bar


Valves used to prevent the uncontrolled descent of an actuator in the case of a hose burst. When the flow exceeds in the valve setting (reaction flow), the valve will block the flow. These valves are not load holding or unidirectional restrictors.

A flow control valve is recommended downstream of the valve.



Body: steel, burnished.



Screw the valve into the correct port connecting V to the supply flow and C to the actuator.


  •  Preset hose bursts available (the reaction flow should be set to 1.5 times the flow rate of the syste,). Please specify flow (It/min) or distance S (mm) from the flat to the valve.
  •  Hole on the flat (CODE/F, please specify hole on the sealing face) for a slow load descent with closed valve.
  • Valve complete with male-female or female-female body for in line mounting by the actuator.



More Information
Brand Oleodinamica Marchesini
Flow Rate 20 L/min
Port Size 1/4 BSP Ports
Write Your Own Review
You're reviewing:Hydraulic Hose Burst Cartridge Valve (Cartridge Only) VUBA 1/4
Your Rating
Flowfit © 2021. All rights reserved