Hydraulic End Of Stroke Valve, Normally Open, V-FCR 1T 60
Hydraulic End Of Stroke Valve, Normally Open, V-FCR 1T 60, Max Flow 60 L/min, Max Pressure 350 Bar
- 3/8" BSP
- Max Flow 60 L/min
- Max Pressure 350 Bar
- Start Closing 7mm
- Max Stroke 20mm
USE AND OPERATION:
This valve is used to block the oil supply to a hydraulic circuit or to stop an actuator's stroke (Valve is normally open).
The valve is closed by either pulling or pushing the spool, which immediately stops the oil flow.
MATERIALS AND FEATURES:
Body: cast iron.
Internal components: grounded and hardened steel.
Seals: BUNA N standard
Leakage: Minimal leakage.
Connect P to the control valve and A to the circuit or to the actuator. When spool is operated, flow is blocked from P to A, whilst the check valve enables free flow in the reverse direction (from A to P).
Oil temperature 50° C – Oil viscosity: 30 cST
|Flow Rate||60 L/min|
|Port Size||3/8 BSP Ports|
Write Your Own Review
More from Oleodinamica Marchesini
Hydraulic Double Overcentre Valve Type A, VBCD DE AAs low as £111.50 £92.92
Hydraulic 2 Way Flow Compensated Control Valve, RFP2As low as £73.18 £60.98
Hydraulic Single Overcentre Valve Fixing By Screw, VBCD SE A FLVAs low as £73.52 £61.27
Hydraulic Single Overcentre Valve For Closed Centre Type A, VBCD SE-A CCAs low as £82.52 £68.77
Hydraulic 3 Way Diverter Valve, Closed Centre, BSP Ports, DF 3 VIEAs low as £27.55 £22.96