Hydraulic Barrel Type Unidirectional Flow Control Valve, VRF 1/4
- Buy 7 for £19.48 £16.23 each and save 5%
- Buy 15 for £18.44 £15.37 each and save 10%
- Buy 31 for £16.38 £13.65 each and save 20%
- Buy 61 for £14.34 £11.95 each and save 30%
Barrel Type Unidirectional Flow Control Valve, VRF 1/4", Max Flow 20 L/min, Max Pressure 300 Bar, Cracking Pressure 0,5 Bar
- 1/4" BSP
- Max Flow 20 L/min
- Max Pressure 300 Bar
- Cracking Pressure 0,5 Bar
USE AND OPERATION:
These valves are used to adjust speed of actuators in one direction, flow is free in the reverse. Pressure compensation is not provided, flow rate depends on pressure and oil viscosity.
MATERIALS AND FEATURES:
Body: zinc-plated steel.
Internal parts: hardened and ground steel.
Seal: BUNA N standard.
Tightness: by diameter combination. Minor leakage with closed valve.
Connect V to the supply flow and C to the actuator to be controlled. The flow is adjusted from C to V and free in the reverse direction. When used on actuators with double pilot check valves, the VRF has to be mounted between the actuator and the double pilot check valve. Flow adjustements are made by rotating the coupling: clockwise rotation increases the flow and vice versa. Once the flow has been set, tighten the lock nut in order to keep the desired setting in case of vibrations.
Oil temperature 50° C – Oil viscosity: 30 cST
|Flow Rate||20 L/min|
|Port Size||1/4 BSP Ports|
Write Your Own Review
More from Oleodinamica Marchesini
Hydraulic Single Overcentre Valve Flangeable, Closed Centre, VBCD SE FL CCAs low as £90.23 £75.19
Hydraulic Double Pilot Operated Check Valves With Manual Shut-Off, VBPDE L C/RUBAs low as £41.81 £34.84
Hydraulic Sequence Valves With Primary Pressure Compensation, VSQAPPAs low as £64.04 £53.37
Hydraulic Single Overcentre Valve For Closed Centre Type A, VBCD SE-A CCAs low as £82.52 £68.77