Press-fit Filler Breather with easy grip vertical ribs.
These Filler Breathers are not threaded, but fit snugly into a pre-drilled hole and seal by means of ‘O’ rings located on the stem. Hole tolerances: -0 + 0.1mm.
These Filler Breathers are produced from Thermoplastic Polymide 66 which offers high mechanical resistance at both lower and higher temperatures (100°C max).
Seals: 2 Oil resistant ‘O’ Rings, NBR 70 shore.
The Filler Breather model TP/F has a large breathing capacity and is applied where a high volume of air change takes place, in example, hydraulic systems that utilise high ratio hydraulic cylinders. They are not recommended for usage on mobile equipment, where strong movement of the oil tank is present.
