 | SINGLE ACTING PLOUGH OVERTURNING VALVES USE AND OPERATION
This valve has been realised for use on cylinders for reversible plough to obtain the automatic backflow and therefore the reversal of the motion of the hydraulic cylinder that makes the plough rotate. It is provided with a single pilot check valve which guarantees safety just on the block side, whilst the stem side it must be leaned on the plough mechanical locks. Assembly on balanced and light plough with internal diameters 40/50mm and 60/80mm is recommended.
Body: Zinc-plated steel
Internal parts: Hardened and ground steel
Seals: Buna N standard
Tightness: No leakage.
These valves are supplied with exchange pressure at 140 Bar: according to your requirements, pressure setting can be modified by acting on the pressure regulator.
Applications: Connect C1 to the cylinder’s stem, C2 to the block, P and T to the machine inlet. Due to it’s shape, it can be inline assembled on a hydraulic cylinder or directly fixed on the plough by means of the threaded hole on the body. |
|
