 | PUSH-IN FILLER BREATHER Filler breather for tank top installation with breather and strainer and complete with safety chains. Just drill a hole and push in.
NOW NO NEED TO DRILL FIXING HOLES, JUST CUT A HOLE IN THE TOP OF THE RESERVOIR WITH A DIAMETER OF 55MM MIN AND 55.3MM MAX. WALL THICKNESS MUST NOT EXCEED 8MM AND NOT LESS THAN 2MM.
ASSEMBLY CONTAINS 3 PARTS. TO INSTALL THE INSIDE LOCKING RING HAS TO BE REMOVED TO INSERT THE MAIN BODY INTO A PRE-DRILLED HOLE. ONCE INSERTED THE INSIDE LOCKING RING HAS TO BE INSTALLED AND THEN THE EXTERNAL LOCKING RING HAS TO BE TIGHTENED
MAX OPERATING TEMPERATURE 70-80°C |
|
