In order to display the documentation in PDF format, Adobe Acrobat is required.
Harrier Fluid Power Ltd, Parys Road, Ludlow Business Park, Ludlow, Shropshire SY8 1XY United Kingdom Phone: 01584 876 033 Fax: 01584 876 044 Company Reg. No. 682 2498 09 Registered in England and Wales
USE AND OPERATION These valves are used to control actuator’s movement and block in one direction in order to enable the following functions: Under control descent of a load: load’s weight doesn’t carry it way as the valve prevent any cavitations of the actuator. Limited maximum pressure in case of shocks created by loads, over loads or sudden manoeuvring (load control with open centre distributor)
Body: Zinc-plated steel Internal parts: Hardened and ground steel Seals: Buna N standard Tightness: minor leakage Standard settings: 320 bar
Valve setting must be at least 1,3 times more than load pressure in order to enable the valve to close even when undergone to the maximum load pressure
Applications: Connect v1 and v2 to the pressure flow, c1 to the free flow side of the actuator and c2 to the actuator’s side you want the low to be blocked. In-line mounting
ON REQUEST: OTHER SETTINGS AVAILABLE, PILOT RATION 1:8 (SPECIFY CODE/RP18), SEALING CAP (CODE / P) AND ARRANGED SEALING CAP (CODE/PP)
