In order to display the documentation in PDF format, Adobe Acrobat is required.
Harrier Fluid Power Ltd, Parys Road, Ludlow Business Park, Ludlow, Shropshire SY8 1XY United Kingdom Phone: 01584 876 033 Fax: 01584 876 044 Company Reg. No. 682 2498 09 Registered in England and Wales
USE AND OPERATION This valve is used to adjust flow speed of actuators in both directions. As pressure compensation is not provided, flow adjustment depends on pressure and fluid viscosity. High adjustment sensitivity.
Body: Zinc-plated steel Internal parts: Hardened and ground steel Seals: Buna N standard Tightness: Needle type, Minor leakage with closed valve.
Applications: Connect a port to the pressure. Flow will be adjusted in the other one. When used on actuator with double pilot check valve, VRFB has to be mounted between the actuator and the double pilot check valve. Flow adjustment is made by rotating the aluminium hand knob after loosening the side locking screw. This particular configuration allows an accurate and sensitive adjustment.
