In order to display the documentation in PDF format, Adobe Acrobat is required.
Harrier Fluid Power Ltd, Parys Road, Ludlow Business Park, Ludlow, Shropshire SY8 1XY United Kingdom Phone: 01584 876 033 Fax: 01584 876 044 Company Reg. No. 682 2498 09 Registered in England and Wales
USE AND OPERATION Made up by 2 relief valves with crossed tank, this valve is used to block pressure to a certain setting in the 2 ports of an actuator/hydraulic motor. It’s ideal to provide protection against sudden shock pressures and to adjust different pressures in the 2 ports of an hydraulic circuit as well. The differential valve makes the opening slower but more constant setting even with flow changes.
Body: Zinc-plated steel Internal parts: Hardened and ground steel Seals: Buna N standard Poppet type: minor leakage
Applications: Connect V1 and V2 to the pressure flow or to the actuator/hydraulic motor. Vice versa for the remaining port V1 and V2. Mounting by the actuator is highly recommended in order to avoid pressure drops.
ON REQUEST: DIFFERENT SETTING RANGE AVAILABLE (SEE TABLE BELOW) OTHER SETTINGS AVAILABLE (CODE/T:PLEASE SPECIFY THE DESIRED SETTING)
