In order to display the documentation in PDF format, Adobe Acrobat is required.
Harrier Fluid Power Ltd, Parys Road, Ludlow Business Park, Ludlow, Shropshire SY8 1XY United Kingdom Phone: 01584 876 033 Fax: 01584 876 044 Company Reg. No. 682 2498 09 Registered in England and Wales
USE AND OPERATION This valve is made up of two 3-way diverters coupled: each of the 2 parts are used to divert the inlet flow towards two ports. The single lever controls both the parts at the same time. It’s ideal to control 2 actuators.
Body: Cast iron Internal parts: Hardened and ground steel Seals: Buna N standard Tightness: Minor leakage.
Applications: Connect P and P’ to the 2 pressure flows, Ports A and B to the first actuator and ports A’ and B’ to the second actuator. With lever in position 1, P is connected to A and P’ to A’; with lever in position 2, P is connected to B and P’ to B’. With lever in central position all ports are connected to each other (open centre)
ON REQUEST: CLOSED CENTRE (CODE/CC). HIGH PRESSURE - UP TO 400 BAR (CODE/AP).
