3 PORT FLOW CONTROL VALVE WITH EXCESS BACK TO TANK
USE AND OPERATION This valve enables to keep "P" flow constant to a certain setting, independently of the required pressure or the inlet flow of the valve. Exceeded flow is drained directly in T (tank).
Body: Zinc-plated steel Internal parts: Hardened and ground steel Seals: Buna N standard Tightness: By diameter combination. Minor leakage (few drops per minute)
Applications: Connect E to the pressure and P to the line where flow adjustment is needed.. Connect T to the tank. To adjust inlet pressure in P screw in or out, hand wheel, after loosening the locknut.
