The Mechanical Clutches are uni-directional and bi-directional.

When coupled with our range of gear pumps we recommend to engage and disengage the pump when the directional valve is in the unload position at a speed of not more than 1800 rpm.

In the reversible position the max engagement and disengagement speed is 1000 r.p.m.

Lubrication
SAE 90 gear oil must be put in the mechanical clutch prior to use please note we do not supply the gear oil and will not accept responsibility for customers not doing putting oil in.

Change the oil after the first 60-80 hours and then every 12 months or 1500 hours which ever falls first.

Maintenance
Please check the oil level via the special oil window every 50 hours. Working temperatures should not exceed 120 degrees celcius under continuos duty cycle.

Specifiy the correct Mechanical Clutch. Please check with the Technical Sales Office if you are not sure which mechanical clutch to use.

Clockwise rotation - Max 5000rpm
Nominal torque and voltages shown in part number description.